Torque
CWST-THX01 Standard Dynamic Torque Sensor
CWST-THX series torque sensor is a signal coupler specially developed to transmit torqueparameters. It adopts proven strain gauge measurement technology, consists an strain bridge on theelastic shaft, and provides the strain bridge with power to obtain the flexible shaft twisted electricalsignals. Amplify the strain signal, go through voltage / frequency conversion, and make it into afrequency signal proportional to the torsional strain. The wireless non-contact transmission send thetorque signal to converter circuit, Thus ensured the life of the sensor.
Features
Features
Power and signal transfer non-contact function
With output signal digitizing function, anti-jamming
Can deliver static torque signal, rotation torque signal, dynamic torque signal, static torque signal
Rotation, speed, and direction have no influence on signal delivering. Can adapt to long time,
high-speed operation
High accuracy and stability
Need no repeated zero setting to continuously deliver positive and negative torque signal
No collector rings and other wear parts, can withstand long time running with high-speed
Can be installed anywhere and any direction; With small size, light weight, it is easy to install
Application
Application
Motors, engines, internal combustion engines, gear and other rotary power equipment’s output torque
and power detection
Fans, pumps, gearboxes, torque wrench, screw, drill pipe’s torque and power detection
Railway locomotives, cars, tractors, airplanes, ships, mining machinery’s torque and power detection
Sewage treatment system’s torque and power detection, manufacturing viscometer
Torque detection and control during industrial process.
Technical Specifications
Technical Specifications
Installation
1. According to the connection form of the shaft and the length of torque sensor, determine the distance between the prime mover and the load, then adjust the prime mover and the load axis with respect to distance from the reference plane. Their axes’ coaxial is less than Φ 0.03mm, and concentricity shall not exceed 0.1mm. Fix the prime mover and the load on the plane.
2. Put the couplings into their respective axes.
3. Adjust the distance between the torque sensor and the reference plane, make sure the prime mover and load’s coaxial is less than Φ 0.03mm, then fix the torque sensor to the plane.
4. Tighten couplings to complete installation.
Installation Precautions and Maintenance
1. When in installation, don’t live action, direct beat and crash sensors.
2. Coupling fastening bolts should be tightened, outside coupling shield should be added, avoid personal injury.
3. Power and load equipment must be fixed to avoid vibration
4. The base of the sensor and device should be fixed (can swing) as flexible as possible, to avoid bending moments.
5. Operation environment: torque sensor should be installed in an ambient temperature of 0 ℃ ~ 60 ℃, relative humidity less than 90%
6. Non-flammable, explosive materials environment.
7. Should not be installed in the environment of strong electromagnetic interference.
8. Should grease both ends of the torque sensor bearing every other year. When greasing, only open the ends of the bearing cover, add grease to the bearing, and then cover both ends.
9. Should be stored in a dry, non-corrosive, room temperature -20 ℃ --70 ℃ environment.
