Dynamic Weighing
WIM Sensor
Product application
1, Free way, high way speeding monitoring governance
2, Highway weight charges
3, Road traffic statistic, vehicle classification
4, Road carrying capacity scientific research
5, Road, bridge security operation management
6, Digital highway construction
CWST QST8400 Piezoelectric WIM Sensor
The piezoelectric quartz WIM sensors adopt piezoelectric quartz crystal as a measuring sensor and use patented
structure. The sensor has four standard length: 1 m, 1.5 m and 1.75 m, 2 m. Thus it can accommodate different
widths of lanes, and adapt to dynamic road weighing needs.
【Technical parameter】
1, Free way, high way speeding monitoring governance
2, Highway weight charges
3, Road traffic statistic, vehicle classification
4, Road carrying capacity scientific research
5, Road, bridge security operation management
6, Digital highway construction
Features:
1) Easy installation, short construction period
2) Detection of a wide range of axle load (50 kg - 35,000 kg)
3) The speed of adaptation Weighing range (5 to 200 km / h)
4) Weighing accuracy almost independent of ambient temperature
5) Good concealment
6) Long working life
7) Low maintenance costs
8) Cost effective
1) Easy installation, short construction period
2) Detection of a wide range of axle load (50 kg - 35,000 kg)
3) The speed of adaptation Weighing range (5 to 200 km / h)
4) Weighing accuracy almost independent of ambient temperature
5) Good concealment
6) Long working life
7) Low maintenance costs
8) Cost effective
CWST QST8400 Piezoelectric WIM Sensor
The piezoelectric quartz WIM sensors adopt piezoelectric quartz crystal as a measuring sensor and use patented
structure. The sensor has four standard length: 1 m, 1.5 m and 1.75 m, 2 m. Thus it can accommodate different
widths of lanes, and adapt to dynamic road weighing needs.
【Technical parameter】
| Sensor cross-sectional dimensions | 44×52mm2 | Output temperature | ＜1%F.S/50℃ |
| Lengths | 1m,1.5m,1.75m,2m | Operating temperature | -45℃～80℃ |
| Range | Wheel load range: 35T | Electrical connection | High frequency low noise coaxial cable |
| Load capacity | 150%FS | Bearing surface | Polished bearing surfaces |
| Load sensitivity | 0.7~0.8pC/N | Linear | Better than±2% |
| Adaptation speed | 5 km/h～200km/h | consistency | Better than±3% |
| Output impedance | ＞1010Ω | Repeatability | Better than±2% |
| Protection class | IP68 | Integrated accuracy | Better than±5% |
